I recently purchased both an allpixel mini and a pipixel. I’ve successfully configured Hyperion to work with the pipixel but am struggling to get the allpixel to work. I’ve confirmed the current device location is /dev/ttyACM0. I can make a successful connection using HyperCon and send commands but I have no LED activity. Any chance someone has utilized the allpixel with Hyperion and can share their configuration?
Hyperion would have to support the AllPixel protocol: https://github.com/ManiacalLabs/BiblioPixel/wiki/Serial#protocol
To my knowledge it doesn’t. I’m not super familiar with that software though.
···
On Mon, Nov 20, 2017 at 10:17 PM, Eric Leese ecleese@gmail.com wrote:
I recently purchased both an allpixel mini and a pipixel. I’ve successfully configured Hyperion to work with the pipixel but am struggling to get the allpixel to work. I’ve confirmed the current device location is /dev/ttyACM0. I can make a successful connection using HyperCon and send commands but I have no LED activity. Any chance someone has utilized the allpixel with Hyperion and can share their configuration?
–
You received this message because you are subscribed to the Google Groups “Maniacal Labs Users” group.
To unsubscribe from this group and stop receiving emails from it, send an email to maniacal-labs-users+unsubscribe@googlegroups.com.
To post to this group, send email to maniacal-labs-users@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/maniacal-labs-users/a4934627-8a73-4791-b8c6-1392fbafc2d3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.